MVI56-DEM
♦
ControlLogix Platform
Installing and Configuring the Module
Honeywell DE Communication Module
Page 20 of 80
ProSoft Technology, Inc.
March 6, 2008
The next step in the module's setup is to define the User Defined Data Types to
be used with the module. Copy these data types from the example ladder logic if
you are not using the example. They are already defined if you are starting from
the example ladder logic. The Controller Organization window should display the
User Defined Data Types shown in the following example:
The next step in module setup is to define the data tag to be used to interface
with the module and the ladder logic. Open the Controller Tags Edit Tags dialog
box and enter the values shown in the following example. The MVI56-DEM
module is defined in the example as DEM1 to hold all data related to the module
(type DEMModule). The tag name can be set to any valid tag name desired.
When using the example ladder logic, this step has already been performed.
