MVI-ADMNET
♦
'C' Programmable
Setting Up Your Development Environment
Ethernet Module
Page 26 of 90
ProSoft Technology, Inc.
December 13, 2006
20
When complete, the
Success
window appears:
21
Click
OK
. The executable file will be located in the directory listed in the Final
box of the Output Directories (that is, C:\adm\sample). The
Project Options
window can be accessed by clicking
Options
→
Project
from the
Main Menu.
3.2
Setting Up WINIMAGE
WINIMAGE is a Win9x/NT utility used to create disk images for downloading to
the MVI module. It does not require the used of a floppy diskette. In addition, it is
not necessary to estimate the disk image size, because WINIMAGE does this
automatically and can truncate the unused portion of the disk. WINIMAGE will
de-fragment a disk image so that files may be deleted and added to the image
without resulting in wasted space.
To install WINIMAGE, unzip the winima40.zip file from the CD-ROM in a sub-
directory on your PC running Win9x or NT 4.0. To start WINIMAGE, run
WINIMAGE.EXE.
3.3 Installing
and
Configuring the Module
This chapter describes how to install and configure the module to work with your
application. The configuration process consists of the following steps.
1
Use RSLogix to identify the module to the processor and add the module to a
project.
NOTE:
The RSLogix software must be in "offline" mode to add the module to a
project.
2
Modify the module's configuration files to meet the needs of your application,
and copy the updated configuration to the module. Example configuration
files are provided on the CD-ROM.
3
Modify the example ladder logic to meet the needs of your application, and
copy the ladder logic to the processor. Example ladder logic files are provided
on the CD-ROM.
