104S
♦
ProLinx Gateway
Configure the Gateway
(Firmware v3.00 and later)
Protocol Manual
ProSoft Technology, Inc.
Page 15 of 157
January 22, 2010
Database Register
-1 or 0 to 3992 as an even value
This parameter specifies if the NTP time computed by the driver is to be placed into
the module’s database. If a value of -1 is specified, the time will not be placed into
the database. If the value is between 0 and 3992, the time will be placed in the
database. The first 4 bytes will represent the seconds since 1/1/1970, and the
second 4 bytes will represent the number of microseconds. An even value should be
used for the register value in order for the data to be stored correctly.
Summary of Contents for ProLinx 104S
Page 4: ......