Advanced Features
22
C: Programming a Second TV, VCR, etc.
to Other Device Buttons.
This feature is used to program the remote control for two or
more TVs, VCRs, etc., or to program a device into a mode with a
different
Device Button
name. You can store the three-digit
Set-Up
Code
number for any device into any other unused
Device Button
.
Example:
If your home entertainment system contains two
VCRs. First, using the
VCR Device
button, program the
remote via three digit code method to operate the first
VCR. Then, program your second VCR into a
Device
Button
that is not being used, e.g.,
AUX
using this method.
1
Turn on the device.
2
On the remote control, press the
Device Button
that you will
assign for the device and the
MUTE
button,
simultaneously. Program indicator(red) and Device light
will be on.
3
Press the
Device Button
that corresponds to the original
device.
4
Locate the
Set-Up Code
number for the device from the
tables found on pages (27 - 41).
5
Point the remote toward the device and press in the first
Set-Up Code
number. The lights will flash once. Your device
will turn off when the correct
Set-Up Code
number has been
selected. If it does not turn off, select the next
Set-Up Code
number from the table, and press in that code number.
When your device turns off, proceed to Step 6.
6
Press the
Device Button
that was selected in Step 2. to store
the
Set-Up Code
number. The lights will flash twice to
confirm the programming.
The second device can now be operated by pressing the
assigned
Device Button
and using the buttons within this mode.
Summary of Contents for RV479 DTS-ES
