INSTALLATION & SAFETY INSTRUCTIONS
FOR
BACK/HEADREST EXTENSION
The
BKSE1
and
BKSE2
attach to the
Posterior Pelvic Support Gate
using the two knobs (
A
)
that are taped to the extension in shipping. Remove the knobs and position the back/headrest
extension so that the knobs can be inserted through the vertical slots on the extension. Adjust to
desired height and tighten the knobs.
When using the
BKSE1
or
BKSE2
option the velcro strap (
B
) on the upper lateral supports
should be secured around the back extension once the gate has been closed to give additional
support to the assembly. It is not needed for upper trunk support since that function is taken over
by the back extension.
B
A
Stander pictured
with BKSE2-
back/headrest
extension
