PRODUCT PARTS:
Figure 1:
Program switch with a knob
Turn dial to desired function:
“0” –On/Off
“1” –B Keep Water Warm
“2” –Red Light + Keep Water Warm
“3” –B Red Light (does not keep water warm)
INSTALLATION and OPERATION INSTRUCTIONS:
You must fill in warm water before turning on the spa. Do not operate this spa without
water in the spa bucket.
1
Installation
Check and make sure there is no damage on power cord and
the product, when you open the package case.
2
Stabilize the Spa
Place the spa on flat and dry floor where you want to use.
Make sure you are seated on a chair or sofa before starting.
Do not plug in power cord to the power outlet now.
3
Filling in Water
You must fill in warm/hot water before turning on the foot
spa. Never try to operate this spa without water in the
bucket.
Filling in water with a water bucket or a clean pot. Do not
have your spa under faucet directly to fill water.
Recommend filling in warm/hot water.
Plug in power cord to the power outlet.
4
0
Switch program knob on power.
5
1
Switch program knob on bubble function and keep warm
function.
6
2
Switch program knob on red light function and keep warm
function.
7
3
Switch program knob on bubble function and red-light
function.
