background image

Page 9

7  

Warning Instructions and Warranty 

7.1   Warnings and Safety Instructions

For reasons of the product liability, we are obligated to make clear certain safety aspects which must not be 
ignored under any circumstances. The devices must 

not be stored or operated in damp or wet environment

The device serves for controlling MIDI equipment and amplifiers and may be used for this purpose exclusively. 
This foot controller uses the Prostage StageWire technology. It may only be connected to a Prostage receiver device 
(XDS, XLS or XTMpro) or to the link connector of another Prostage foot controller using the StageWire technology. 
The foot controller is supplied with electricity by the receiver device (phantom powered).

The equipment may be opened by qualified technical personnel only

. There are no user serviceable parts 

inside the devices.
In order to avoid damages, you should be careful when transporting and setting up the devices. Please 

avoid 

strong variations in temperature

. Particularly the change from the cold transport vehicle to the, usually warm, 

stage can cause condensing humidity, which can cause leaks and thus can evoke defects. Usually, 60 minutes are 
sufficient to equalize the temperature. For transportation, always carry the devices in a robust packing or rack, 
especially if you change your place of work frequently.

No containers filled with liquid may be placed on the equipment!

7.2   Warranty / Support

All Prostage PurpleLine units are covered by a 

2-year warranty

. Prostage shall not be liable if the damage was 

caused by inappropriate use or if the units are not connected as described in this users manual. There are no user 
serviceable parts inside the unit. The detailed terms of the warranty can be downloaded on the Prostage website.

If you need technical support, please contact your local dealer or email info@prostage.eu   

7.3   Disposal of Old Devices

The PurpleLine products are subject to the European guideline 2002/96/EC. All old electric and electronic devices 
must be disposed separately from the domestic waste, using the collection points provided by the government. The 
devices must not be disposed with domestic or skip refuse. Information about collecting points or collection dates, 
can be asked from the local administration or the local waste management company.
Please also carry the packing to an environmentally fair disposal. Cardboard boxes can be transferred with 
wastepaper collections or to the public collecting stations for recycling. Foils of the shipment are collected by the 
local waste management company and are forwarded to environmentally fair disposal.

Summary of Contents for X07











Reviews: