Setting up your Protraining 2.0 on your starting system :
PROBOX (Prostart starting system)
OR
PROADAPTER (Adaptor in order to use the product from any starting systems)
1/ Connect the cable extension of 2m /6.5ft from the starting system or adapter (femelle plug) to the
ST-BOX Bluetooth device. (male plug)
If you don’t have any plug on your starting system, please contact us through Quentin.grun@prostart.fr
2/ Connect the cable extension of 60m / 200ft on drum to the FINAL SENSOR plug on the ST-BOX.
3/ Take out protective covers to open tripods and adjust them at the height of your choice.
4/ Supply sensor(s) in connecting the cable extension(s) of 0.6m / 2ft
5-A/ If you have only one sensor, connect it to the cable extension of 60m / 200ft on drum.
connect the second one to the cable extension of 60m / 200ft on drum.
Setting up your Protraining 2.0 on independent mode :
1/ Connect the cable extension of 2m / 6.5ft from the ST-BOX Bluetooth device (male plug) to the ST-BAT
(female plug).
2/ Connect the cable extension of 60m / 200ft on drum to the ST-BOX Bluetooth device (FINAL SENSOR plug).
3/ Take out protective covers to open tripods and adjust them at the height of your choice.
4/ Supply sensor(s) in connecting the cable extension(s) of 0.6m/2ft
to the cable extension of 60m / 200ft on drum.
the ST-BOX(SPLIT SENSOR plug) and also connect the third one to the cable extension of 60m / 200ft on drum.
How to set up the sensor(s) ?
Each sensor needs to be supplied. You can notice it when the the green indicator is switched ON.
Orange indicators are switched ON, it means that your system is ready to be used.
Safety instructions :
- Do not walk/ride on cables.
- Hand tighten all the connectors, control knobs and pan handles only.
- Remove dust, dirt & water from the sensor before each utilisation.
1/ Download our App’ on Google Play & Apple Store : PROSTART
2/ Click on 2S TIMING and Capture buttons and then click on the Bluetooth Logo to link your device with the
ST-BOX. Name of the Bluetooth device will be STBOX-xxxxx
3/ You can now measure, save and analyse all your times.
How to link the Protrainig 2.0 timing system to the PROSTART Application ?
FINAL SENSOR
CABLE EXTENSION
SPLIT SENSOR
ST-BOX
START
SENSOR
STARTING
SYSTEM
ST-BAT
