- 80 -
4.28
Apply Settings/Restart Servers – Validate New
Settings & Restart Video Servers
All the new settings you have made could only be committed to the Prima IP’s database by clicking
the Store
Settings/Store/Store User
button on each setting page. However, just clicking any of these buttons will not
have these new settings immediately validated. You should hit the
Restart Servers
button so that new settings
can be put into use at once.
Note:
The
Restart Servers
button will disconnect all current viewer connections.
Note:
In addition to the
Restart Servers
button, the Prima IP also provides a
Reboot
button (on
Maintenance/Reboot
page). You can use this
Reboot
button only when the
Restart Servers
button
cannot work any longer to bring Prima IP to normal restart for a proper viewer connection.
If you find the
Restart Servers
button no longer works, you can click the
Reboot
button on the
Maintenance/Reboot
Page. Only bear in mind that the reboot brought about by hitting the
Reboot
button is a total reboot and takes longer time to boot up completely, while
Restart
Servers
is much
quicker (just a few seconds) since it restarts only the server programs on the Prima IP.