39
MARK68AF1001 Rev 2
The Care and Maintenance in this section provides information on how to properly care for
your equipment after each use and during the lifespan of the unit. It will help provide you with
basic troubleshooting and maitenance questions. If your tanning bed fails to operate properly,
please review the following steps before calling for service.
THE MASSAGE BED YOU PURCHASED CONTAINS VOLTAGES WHICH ARE
POTENTIALLY HAZARDOUS. IN THE FOLLOWING PAGES YOU WILL RECEIVE A
CLEAR DESCRIPTION OF WHAT CARE AND MAINTENANCE CAN BE DONE BY A
NON-SKILLED PERSON THAT HAS READ AND UNDERSTOOD THE MANUAL AND
WHICH REPAIRS AND MAINTENANCES SHOULD BE PERFORMED BY CERTIFIED
TECHNICIANS.
FOR YOUR MASSAGE BED:
Safe and continuous operation of your massage bed depends partially on the care taken by
users. Please observe the following precautions when the unit is in use.
• Do not allow sharp object in the bed while in use.
• Do not allow liquid or any foreign objects to get inside or on the unit.
• Ensure the back side of the unit is at least 8 to 12 inches from the wall.
• The room in which the unit is located must be well ventilated.
•
only use DISTILLED water to fill the unit.
Note:
Warranty is VOID if distilled water is not
used.
•
Do not turn the Machine on and off frequently within the space of 3 minutes.
Care and Maintenance
DANGER - High Voltage !
You can be killed or injured by an electric shock!
During maintenance and service work there is a risk that you can touch live parts and could
receive a fatal shock. When performing basic care maintenance and before a certified
technician performs maintenance work they should make sure:
• The device is disconnected from the power supply.
• The device is not in use.
• Do not reach behind the cover plates and do not open the unit while it is switched on.
•
Refit and safety devices after work has been completed.
DANGER!
Basic Care Maintenance
Basic Care Maintenace and service of your equipment play a major role in maintaining the
units performance and appearance over the period of its useful life. Compliance at the intervals
specified for your unit are absolutely necessary to ensure the proper operation of the equipment.
The table below is a preventative care table that can be done by any unskilled person, if any
service outside of this table is needed please contact ProSun immediately and this would should
only be done by a certified technician.
The top barrier and netting are designed to withstand 375lbs of weight, but they are not designed
for children to play on or for “jumping or falling” on. Please, never allow children to play or jump
on the AquaFrixio and make sure all users sit on the edge and gently pivot onto the top surface.
The equipment should be routinely serviced and maintenanced by a ProSun certified technician
or someone who has performed maintenance by phone with a ProSun technician.
