15
Rev 1
Technical Data
Electrical Specifications
RenuvaSkin S420
Power consumption rating:
32 Amp
Electrical Rating
230V ~ 32A 60Hz
Rated Fuses:
40 amp 2-pole
Continuous Operation:
Continuous operation for a maximum of
15 minutes.
Load on the base plate:
Max 250lbs or 113 Kg
Equipment Weight:
Approx 432 lb or 196 kg
Operating Humidity:
30-75%
Ambient Operating temperature:
50 to 86 degrees Farenheit
10 to 30 degress Celcius
Max. operating altitude (above sea level): <6500 ft (2000m)
Max surface temperature:
146.6 degrees Farenheit
63.7 degrees Celcius
Note: If operating this equipment
at altitudes above 6500 ft / 2000m
above sea level adaption may be
needed to get normal operation.
Important Notice:
• Never operate this machine when the ambient room air temperature is greater than 90
degrees Fahrenheit. Never operate this machine when it is not ventilating itself properly (too
hot inside).
• This device may not be used by people with reduced physical, sensory or mental capabilities
or who have insufficient epxerience and/or knowledge without supervision. A person
responsible for their safety must make sure, either by supervision or instruction, tha tthe
deivce is used correct and safely. If there is any doubt about the above mentioned instructions
then that person cannot use this device.
The Electrical requirements for your ProSun unit are:
Model
Breaker 1 Volt 1
Breaker 3 Volt 3
Hertz Operating
Amps 1
Operating
Amps 3
RenuvaSkin S420
4- Amp
230V ~ N/A
N/A
60 Hz 32 Amp
N/A
