７
3. Release plum knob to adjust lifting pole . tighten plum knob to fix its height, open wing valve(Part No.
21HC-2106), release oil drain bolt for oil collection from vehicle.
5) Tank Emptying
When the oil retained in tank near full(see oil window), You need to eject oil out into a disposal tank and
resolve the waste oil accordingly to the instruction of local government.
1. Turn off all the valves.
2. Hold the ejection hook and insert it into the external disposal tank.
3. Connect the air compressor with the air inlet(Part No.32HC-0801)
4. Turn on the wing valve(Part No.32HC-0402) gradually, addingtank
pressure, turn off air compressor when pressure reach to desired pressure.
(The valve will automatically release pressure when the tank pressure reach
1.0 bar/14PSI, turn off the air compressor immediately and quickly
drop the tank pressure below 0.7bar/10PSI,otherwise it could lead
to serious incident)
FIG.7
As FIG.10 shows, discharge Residual oil from Residual oil cup when it reach STOP sign.
FIG.8
FIG.9
