![background image](http://html1.mh-extra.com/html/protec/par-36-rgb-led-mkii/par-36-rgb-led-mkii_user-manual_1619407015.webp)
LED PAR
15
6
Safety Instructions
•
Keep this device away from rain and moisture!
•
Unplug mains lead before opening the housing!
•
Never look directly into the light source (sensitive persons may suffer an epileptic shock).
•
Never leave this device running unattended.
•
Keep away children.
•
When installing the device, make sure there is no highly inflammable material within a
distance of 0.5m.
7
Introduction
Main feature of this LED PAR is, that it can be used as a 4ch DMX controller. In this mode 4 LED
PARs are connected with XLR cables on their DMX In-/Outputs. The first LED PAR is set to DMX
master mode. Now the LED PAR in master mode sent control signals to the connected slaves. There
are different patterns available e.g. all connected LED PARs do the same, each shows different
patterns, chaser programs, fade in – fade out patterns and fade over patterns. The steps of the
patterns can be controlled by music beat or by a potentiometer. The music sensitivity is controllable.
The colour patterns offers a 100% colour mode, a 100% / 50% colour mode, and a 100% / 75% / 50%
/25% colour mode. The colours are shown by random.
A 3ch DMX slave mode is supported, for easy connection in a DMX system. All 512channels are
supported. Stand alone modes colour change, fading patterns and fixed colour settings are supported.
8
Overview
Back view
This picture shows the backside of the LED PAR.
DMX-Input:
In case of external DMX control, the DMX cable is connected here.
DMX-Input pin
Signal
1
Ground
2
Signal “-”
3
Signal “+”
DMX-Output:
Connect here the DMX cable for next unit.
DMX-Output pin
Signal
1
Ground
2
Signal “-”
3
Signal “+”