16-26
Before any operations, please disconnect the electric power supplies.
Remove the left side body panel of the tire changer. Tighten the drive belt by means
of the special adjusting screw (1) on the motor support.
It is necessary to adjust the screw(1) in the locking plate of the mounting arm,if the
mounting head doesn't lock or it doesn't rise from the rim of 2mm necessary for
working.(figure 12-4)
If clamps or bead breaker open/close slowly, it is necessary to clean or replace the
silence, and proceed as follows :( Figure 12-5)
(1). Remove the left side panel of the
machine.
(2). Unscrew the silencer put on the clamp
opening/closing pedal.
(3). Clean by a jet of compressed air or, if
damaged, replace by referring to the spare
parts catalogue.
Figure 12-5
Summary of Contents for TC-512A
Page 17: ...17 26 13 Electric Connection Diagram...
Page 20: ...20 26...
Page 25: ...25 26...
Page 26: ...26 26...
