5
7.2 Installing Wheel
Choose the optimal cone for the center hole and mount it on the balancer.(refer to
figures 7 and 8)
The method shown in figure 8 is preferable because it approximates to installing
wheel on a real car.
7.3 Wheel Parameters Input
Unlike ALU1S and ALU2S which need 4 parameters, other modes need 3
parameters.
Parameter values are shown in
Figure 9 dynamic and static mode
Figure 10 ALU1S mode
Figure 11 ALU2S mode
Figure 6
Figure 7
Figure 8
WB-514 Wheel Balancer user’s manual