12
sticking counterweights on both sides of rim are the same. ALU2S adopts clamping
counterweights on the inside of rim, so the position is still at 12 o’clock.
Note: The automatic gauge can only locate the 12 o’clock position, it will return
to the measurement interface if at any other position. So it is better to use the
brake pedal to locate it at 12 o’clock and do the following operation.
Pull the gauge at the correction plane position,
pick up a counterweight of 55g and put it in the
tip of the gauge, remove the protection paper of
the adhesive tape.
LCD screen displays the sticking positioning .
Stick the counterweight at the position indicated
Firmly stick it with hand.
Figure 26
Figure
27
WB-514 Wheel Balancer user’s manual