4
5.2 Installing parts
z
Shaft . Take out the threaded end and bolts from the accessory case. Mount them
firmly according to figure 5.
z
Mount the cone on the corresponding arm.
z
Mount the guard according to Appendix I.
5.3 Electrical Connection
Put the plug in the socket to finish installing the balancer
6
、
Control Unit
F1----F9 are classic function keys whose functions are given by the prompt article
appearing on the bottom of LCD screen.
Keypad tone can be on or off by the built-in system options.
7
、
Operating Instructions
7.1 Self-check
When switched on, the system begins self-check and enter standard dynamic mode
as it proceeds to 100% without error. Press any key to skip over self-check and enter
standard dynamic mode directly.
Figure 4
Figure 5
WB-514 Wheel Balancer user’s manual