MAINTENANCE
BATTERY INSTALLATION
To avoid the false readings, replace the battery as soon as the low battery
power indicator appears. To avoid electric shock, disconnect the test leads
from any source of voltage before removing the battery cover. Do not
operate the instrument with the battery cover removed.
1) Turn the power off and disconnect the test leads from the meter.
2) Open the rear battery cover with a screwdriver.
3) Remove the old battery and insert the new battery into the battery
holder, observing the correct polarity.
4) Put the battery cover back in place, secure with the screws.
REPLACING FUSES
To avoid electric shock, disconnect the test leads from any source of volt-
age before removing the fuse cover. Do not operate the instrument with
the fuse cover removed.
1) Turn power off and disconnect the test leads from the meter.
2) Remove the cover.
3) Gently remove the old fuse and install the new fuse into the holder.
4) Always use a fuse of the proper size and value (500mA/660V or
10A/600V fast blow).
5) Replace and secure the cover.
17
