8
Assembly of the REAR gearbox & Center diff. / Montage v/d tandwielkast A & Centraal diff /
Montage des réducteurs AR & différentiel central/ Montierung des Getriebe A & Central
FRONT GEAR BOX
Rear Gear Box
Stud lock
A601
Nut lock
A600
F/H 3mm x 10mm (4)
T30.180
Differential gasket set
T30.091
Differential shaft
T30.075
NUT LOCK
90%
Full / Plein / Vol / Voll
OIL (*)
O-rings are a optional part for different driving settings (with O-rings = more acceleration)
Bevel gear small
T30.071
O-ring (option part)
T31.215
Shim ring
3.6x12mm
T30.174
Set screw
5x5mm
T30.192
R/H 3 x 16mm
T30.213
Rear Sus. Hinge pin Holder ( * )
Drive Joint
T30.057
Shim ring
T30.088
Shim ring
T30.111
Pinion Gear Small
T30.069
Rear Toe In (use 3 degrees to start)
T30.048
Gearcase
T30.027
FH/ST 3 x 40mm
T30.184
F/H 3 x 20mm
T30.208
Gearcase
T30.027
Assembly of the Central Differential
FRONT DIFF.
More steering use the ref. SL2500
Standard
use the ref. SL5000
Less steering
use the ref. SL10000
CENTER
DIFF.
Standard
use the ref. SL5000
Quick
use the ref. SL10000
acceleration
REAR DIFF.
Standard
use the ref. SL1000
or use grease
(*) USE ONLY PROTECH SILICONE OIL
F/H 3mm x 40mm (x2)
R/H 3mm x 16mm (x2)
Set Screw 5mm x 5mm (x1)
F/H 3mm x 10mm (x4)
*
YADA ST = 6061 Alu Rear Sus. Hinge Pin Holder T30.084
YADA PRO = 7075 CNC Rear Sus. Hinge Pin Holder T31.213
YADA PRO-X = 7075 CNC Rear Sus. Hinge Pin Holder-X T31.239
High Speed Grease
SL001
8 x 16 x 5 mm
ball bearing
T30.144
Shim ring
T30.088
