Proteco Q80S, Instruction Manual

Q80S_2014                                                                                                                                                                                                                                                                                      

16

PROTECO S.r.l.

Via Neive, 77 - 12050 Castagnito (CN) ITALY     Tel. +39 0173 210111 - Fax +39 0173 210199      info@proteco.net - www.proteco.net

Opening direction of the motor can be changes as follows 

(paragraph 

3.1

)

 1  Use                           buttons to move inside the menu, till the display shows:

  2 

Press and hold button

 for about 

5 seconds

.

  3  Use 

 buttons to select:

     Gate opening from Left to 

Right

 (view from inside courtyard)

Gate opening from Right to 

Left 

(view from inside courtyard)

  4  Press button 

 to go back to the top level menus, 

then press button 

  again till the display shows:

or wait the timeout (20 seconds) to exit.

LIMIT SWICTHES mode

 1  Use 

 buttons to move inside the menu, till the display shows:

  2 

Press and hold button 

for about 

5 seconds

.  

  3 

Use 

 buttons to select:

Use with 

ELECTROMECHANICAL

 Limit Switches (N.C. contact) 

Use with 

MAGNETIC

 Limit Switches (N.O. contact) 

  4  Press button 

 to go back to the top level menus, 

then press button 

  again till the display shows:

or wait the timeout (20 seconds) to exit.

4.2.3 OPENING DIRECTION of the motor

The control unit is preset for use on gate opening from Left to Right:

4.2.4 LIMIT SWITCHES mode selecting

This control unit can be used with 

ELECTROMECHANICAL LIMIT SWITCHES

 (N.C. contact) 

or with 

MAGNETIC LIMIT SWITCHES

 (N.O. contact)