Proteco Q80S, Instruction Manual

17 

                                                                                                                                                                                                                                                                                   Q80S_2014

....

PROTECO S.r.l.

Via Neive, 77 - 12050 Castagnito (CN) ITALY     Tel. +39 0173 210111 - Fax +39 0173 210199      info@proteco.net - www.proteco.net

(min)

....

(max)

4.3 

          FORCE menu

Use this menu to adjust the 

sensibility level of the obstacle detection

 in case of AUTOMATIC Programming mode (         )

or

 to adjust the 

motors force

 in case of SEQUANTIAL Programming mode (           )

.

Press button 

 and use               

 to select menu             , 

then press button 

 to enter the FORCE menu: display will show 

Use 

 buttons to scroll the lower level menus:

      TORQUE/POWER adjustment 

  1  Use 

 buttons to move inside the menu, till the display shows:

  2  Press button 

 to confirm. 

The display now shows the current torque/power level for motor : 

  3  Use 

 buttons to change the motor  torque/power level.

  4  Press button 

 to go back to the top level menus, 

then press button 

  again till the display shows:

or wait the timeout (20 seconds) to exit.

OBSTACLE DETECTION adjustment 

  1  Use                            buttons to move inside the menu, till the display shows:

  2  Press button             to confirm. 

The display now shows the current sensibility level for the obstacle detection of motor : 

  3  Use 

 buttons to change the motor sensibility level

  4 

Pre

ss button 

 to go back to the top level menus, 

then press button 

  again till the display shows:

or wait the timeout (20 seconds) to exit.

(OFF)

(max)

(min)