CORRECT !
Locking pin mounted
in the locking hole
locking pin
locking hole
WRONG !
Locking pin outside
the locking hole
locking pin
locking hole
1. Open the grip.
locking hole
grip
lockin pin
tripod's leg
2. Put the device on the tripod's leg.
Grip locking pin must be fastened
on the locking hole situated on the
outside part of the tripod's leg.
3. Close grip. Lock the grip
using the lever. Grease the
lever's thread with small amount
of constant lubricant before
installation. The winch shall not
slide on the tripod's leg.
INSTALLING ON THE TRIPOD
CAUTION!
Ensure that locking pin is properly fitted into locking hole. Locking pin prevents against device sliding on the tripod's leg.
4. Guide the rope behind two
bolts located above the reel.
2/8
