DAVIT
INSTRUCTION MANUAL
EN 795:2012 Class B
Reference number:
RJ200
BEFORE USE READ THIS MANUAL CAREFULLY
edition: 3/25.02.2019 pl
p. 12
USE NO. 4
Device RJ200 can be used as an
anchor point for mounting on steel
structures using special side seat and
retaining plate and screws or
threaded rods M16.
Side seat with retaining plate forms a
“clamp” around the steel structure
without interfering with its framework.
TECHNICAL PARAMETERS
RJ200:
DIMENSIONS:
WEIGHT
:
Socket - 76.4kg
Rotary arm - 65.0kg
Side seat - 25.0kg
Plate - 12.0kg
CONDITIONS OF USE:
Weather conditions: (+50)°C; (-
30)°C; humidity.
Static strength: min. 12 kN (in
accordance with EN795:2012
Class B).
Number of co-users: 1
MATERIAL:
Powder coated steel
USE:
Construction works on steel
structures, works on façades
based on steel structures
Works at a height
TECHNICAL DATA
Components of the device /
configurations
METHOD OF USE NO. 5
Device RJ200 can be used as an anchor
point for mounting on steel structures
using special side seat and screws or
threaded rods M16.
It is required to prepare bore holes in the
structure.
METHOD OF USE
NO. 6
Device RJ200 can be
used as an anchor
point for mounting on
concrete structures
using special side
seat and mechanical
or chemical anchors
M16.
It is required to
prepare bore holes in
the structure.
TECHNICAL PARAMETERS
RJ200:
DIMENSIONS:
WEIGHT
:
Socket - 76.4kg
Rotary arm - 65.0kg
Side seat - 25.0kg
CONDITIONS OF USE:
Weather conditions: (+50)°C; (-
30)°C; humidity.
Static strength: min. 12 kN (in
accordance with EN795:2012
Class B).
Number of co-users: 1
MATERIAL:
Powder coated steel
USE:
Construction works on steel or
reinforced-concrete structures,
works on façades based on steel
or reinforced-concrete structures
Works at a height
