PT 5780 DVB-T Modulator
ProTelevision Technologies
Operating Instructions
Instruction Manual
Revision 3.11
4-3
The
EXECUTE
button is used to
•
Enter the configuration menu system (GENERAL or SPECIFIC) when in the status menu
system.
•
Confirm changes made to configurable parameters.
4.1.3
Front Panel Display
To guide the user through operations, symbols of the push buttons, which are active at that
particular time appear in the top right hand side of the display.
3
and
4
indicate that the left and right arrow buttons can be used; a
5
indicates that the up
button can be used; a
6
indicates that the down button can be used; a
v
indicates that both
the up and down buttons can be used; and an
E
indicates that the EXECUTE button can be
used.
5
5 6
6 3
3 4
4
Indicates which arrow buttons are active.
E
Indicates that the EXECUTE button must be pressed to activate the required
selection.
<<
>>
These flashing brackets indicate the position of the cursor when in a menu
option listing, also described as the “current” menu option in this manual.
[
]
These flashing brackets indicate the position of the cursor when in a
enumerated parameter listing or when in a parameter set listing. Also
described as the “current” parameter in this manual.
…
…
Indicates that more items are available in the menu option or parameter listing
than can be fitted in the display. Scrolling right with the
4
button will display
these items.
Guide to Menu Display
In addition, the top line of the display also usually shows the current menu option and status.
The bottom line of the display indicates possible menu options or parameter settings.
4.2
Rear Panel
4.2.1
Rear Panel Connections
Safety Ground (chassis)
Summary of Contents for PT 5780
Page 94: ......