background image

- 2 -

IMPORTANT : THE MAXIMUM RECOMMENDED WEIGHT CAPACITY FOR YOUR 

EQUIPMENT IS 125 KG ( 275 BL ).  ALL OF THE TEST STIPULATE

 TO THE EN 957-1+A1 / -5, CLASS HB.

NOTE : THE EQUIPMENT IS SPEED-DEPENDENT ON BRAKING SYSTEM.

WARNING :

 BEFORE COMMENCING WITH ANY EXERCISE PROGRAM, PLEASE CONSULT 

YOUR PHYSICIAN. IF AT ANY TIME DURING EXERCISE YOU FEEL FAINT, DIZZY 
OR EXPERIENCE PAIN, STOP AND CONSULT YOUR PHYSICIAN. IN THE EVENT 
ANY OF THE ABOVE MENTIONED WARNINGS ARE BREACHED BY THE 
CONSUMER. THE MANUFACTURER MAY USE SAME AS A DEFENSE TO ANY 
CLAIM FOR INJURIES, DAMAGE OR LOSS. THE ABOVE WARNINGS ARE IN NO 
WAY INTENDED TO LIMIT OR MODIFY THE CONSUMER'S REMEDIES FOR 
BREACH OF WARRANTIES PURSUANT TO APPLICABLE 

FEDERAL AND STATE 

LAWS OF REGULATIONS

. THEY ARE BEING SUPPLIED STRICTLY TO ENSURE 

THE SAFETY OF THE INDIVIDUALS USING THIS PRODUCT.

THE APPLIANCES ARE NOT FOR CHILDREN UNDER 14 YEARS OF AGES.

IMPORTANT : 

READ ALL INSTRUCTIONS CAREFULLY. ASSEMBLE THE UNIT IN

ACCORDANCE WITH THE STEPS IN THE MANUAL. LAY OUT ALL PARTS ON 
THE FLOOR AND CHECK IF YOU HAVE ALL THE PARTS INCLUDED 
COMPLETELY BEFORE BEGIN ASSEMBLY. IN CASE OF A DISCREPANCY, 
PLEASE CALL CUSTOMER SERVICE OF THE STORE FOR HELP. 

NOTE : SOME PARTS MAY BE FACTORY PRE-ASSEMBLED.

THE SAFETY LEVEL OF THE EQUIPMENT CAN BE MAINTAINED ONLY IF IT IS 
EXAMINED REGULARLY FOR DAMAGED AND WEAR.

MINIMUM SAFE DISTANCE FRONT AND BACK NEED 50cm , LEFT AND 
RIGHT SIDES NEED ABOUT 30cm.

THE " MAX INDICATOR LINE " WHICH MARKS ON THE SEAT TUBE 
REPRESENT THAT THE MINIMUM INSERT DISTANCE , WHILE ADJUSTING THE 
SEAT , PLEASE DO NOT CROSS THIS LINE.

THE PEDAL CRANK TRAINING EQUIPMENT OF CLASS B IS NOT SUITABLE 
FOR THERAPEUTIC PURPOSES.

REPLACE DEFECTIVE COMPONENTS IMMEDIATELY AND KEEP THE 

EQUIPMENT OUT OF USE UNTIL REPAIRED.

NOTE :DO NOT PLUG TO POWER SUPPLY BEFORE MACHINE IS 

FULLY ASSEMBLED.
THE MACHINE IS REQUESTED TO USE DC TRANFORMER,
WHICH SHOULD BE WITH OUTPUT 6V/500 MA, PLEASE 
ALSO REFER TO MONITOR INSTRUCTION FOR THE
PROPER SPECIFICATION INFORMATION.

BEFORE  YOU  BEGIN

Summary of Contents for PEC-4655











Reviews: