16
型，并能够判断出该电池是否能够提供足够的功率来驱动设备。如果您的电池质量不好，
ProVari Radius
会根据电池的安全范围降低功率输出。
The ProVari Radius operates on a single battery. Never stack two batteries.
Never use batteries that are not recommended for use in the ProVari Radius.
Never use magnets on your batteries as this is very dangerous.
ProVari Radius
的使用只需要一节电池。切勿串联两节电池。
切勿使用未经推荐在
ProVari Radius
上使用的电池。
切勿让电池靠近磁铁，否则会非常危险。
Charging a Battery Using a Standard Battery Charger
使用标准充电器充电
Plug the charger unit into an appropriate power supply.
将充电器插入合适的电源。
Insert a battery into the charger and make sure you put the battery in the correct direction.
将电池插入充电器，并确保电池的方向正确。
Align the positive (+) end of the battery with the positive (+) mark on the charger.
将电池的正极（
+
）与充电器正（
+
）极标记对齐。
The LED on the charger will glow red when the batteries are charging.
电池正在充电时，充电器的
LED
指示灯会发红光。
The LED on the charger will glow green when the batteries are charged.
(This could vary depending on the charger that you purchased)
电池充满后，充电器的
LED
指示灯会发绿光。
（根据您所购买充电器的不同，可能会有些变化）
Do not attempt to charge other types of batteries in the battery charger.
The ProVari uses a special kind of battery. Only use approved rechargeable cells.
NEVER use alkaline batteries and never try to charge an alkaline battery.
不要尝试用充电器对其它类型的电池充电。
ProVari
采用的是一种特殊电池。只使用获得批准的充电电池。
永远不要使用碱性电池，永远不要对碱性电池进行充电。
Charging a Battery Using the Built-in Charger
使用内置充电器充电
The side of the device has a port where you can plug in the micro USB plug. This plug will
insert into the device only one way. When the device is plugged in and charging, you will
see a lightning symbol inside the battery icon showing that it's charging. Once it reaches
full charge, the lightning bolt indicator will no longer appear.
在设备的侧面有一个微
USB
插口。
USB
插头只能有一个方向插进去。当设备插入充电时，
屏幕上会显示一个电池及一个闪电的标志以表明正在充电。充满之后，闪电指示就没有了。
