42
取出电池。每次电池出现故障,就要丢弃掉并更换一个新的。切勿充电或反复使用坏电池。还要记住要在
Radius
上使用正确的电池。
Return for Repair
– If you get this error, try installing a new battery and replace the atomizer to see if the
problem goes away. If you continue to get this error, contact customer service for assistance.
送回返修
-
如果出现了这个错误,尝试安装新电池和更换雾化器,看问题是否会消失。如果仍然收到这个
错误信息,请联系客户服务寻求帮助。
Use Correct Battery
– This error will occur if you try to stack two batteries together or you use the wrong
battery. Replace your battery or only use one cell and try again.
使用正确的电池
-
如果您试图将两块电池串联在一起或者使用错误的电池就会出现此错误。更换电池或仅
使用一个电池,然后重试。
Radius Energy Gauge
Radius
能量计
What is Different about the ProVari Radius Available Energy Display?
ProVari Radius
的可用能量显示有何不同?
The Radius Available Energy Display is not like any other battery meter you have seen before for several
reasons. This section will explain why it is so different.
Radius
的可用能量显示和您所见过的任何其它电池表在几个方面有所不同。本节将做详细的解释。
All other devices in use today that use a battery and have some sort of a "power gauge" have low current
drain loads (cell phones, tablets, MP3 players).
现在所有其它使用电池并具有某种“能量表”的设备是低电流负载产品(如手机,平板,
MP3
播放器)。
Low current drain loads take a small amount of energy out of the battery in each use cycle or
continuously take a small amount of current out of the battery. The amount of energy drain is typically
less than ½ watt. Also, the current used is typically consistent, meaning it is close to the same all the
time. In addition, these devices typically have a captive battery (one that you cannot replace) that is a
controlled component that is not changed. This is NOT the case with the Radius.
低电流负载在每个使用周期使用很少的能量或持续地消耗少量的电流。这样的能量消耗通常小于
0.5
瓦。
此外,消耗的电流通常是稳定的,即在任何时间几乎是一样的。另外,这些设备通常有一个可控的不能改
变的内置电池(不能由个人更换)。这些是和
Radius
不同的地方。
Because of this, ProVape engineering has designed a special energy gauge algorithm to be more useful
to the Radius user. It displays the true gauge of available energy more accurately.
正因为如此,
ProVape
工程设计出了一个对
Radius
用户更加有用的能量计的特殊算法。它能更准确更真实
地显示可用能量。
The following factors are used in the special algorithm that allows the energy gauge to be more accurate.