background image

 

 
The MATRIX can also be controlled by an app that has been downloaded to a tablet

 

 

 

   

     

 

 

 

 

     

 

or smart-phone via a Bludetooth connection. 
 
This app is available in the app store for Apple devices, pls search “Sunkare” and

 

   

   

 

 

 

 

 

 

 

 

 

 

download it. It is also available for Android in the Google Play Store. In order to be

       

 

 

 

   

 

 

 

   

     

able to use the app, turn on the bluetooth connection on your smartphone or tablet and

   

 

 

 

   

 

 

   

 

   

 

 

select Sunkare. 
 
With the app, you can: 
 

On/Off 

Variable heat output from 25% to 100% 

Timer with auto shut off 

Password connection to heaters 

Individual heater identification and control

 

 

Shock safeguard 
The

MATRIX PV009-200KB

has the option of s shock safeguard that switches the

 

 

 

 

 

     

 

 

 

 

 

device off if it is shocked in any way. The shock safeguard can be activated with the

 

       

   

 

 

 

 

 

 

 

 

 

 

app and the sensitivity can then be set on a sliding scale. When the device is

 

 

 

 

 

 

 

 

   

 

 

 

 

   

supplied from the factory, the shock safeguard is off. Once the shock safeguard has

 

 

 

 

 

 

   

 

 

 

 

 

 

been activated, it can be operated via the remote control or manually. If the shock

 

   

 

 

 

 

 

 

   

   

 

 

safeguard has switched the device off, the red light at the reception point will blink.

 

 

 

 

 

 

 

 

   

 

 

 

 

 

Check to ensure that the device has not been damaged. If everything is ok, you can

   

 

 

 

 

 

 

 

   

   

 

 

 

restart the device by: 
1.

Using the remote control to switch the device off and then on again. 

2.

Switching it off and on again using the switch, and then selecting the desired

   

 

 

 

 

 

 

 

 

 

 

 

 

output using the reset button (remote control) 
3.

Switching the device off and on again with the app. 

- Open the APP store or Google Play on your device. 

 

 

Summary of Contents for MATRIX PVMA2000 BLK BT


















Reviews: