Board
Diagram
Please
take
the
following
steps
Please
check
the
following
accessory
,
if
you
find
the
item
lost, please contact our local
dealer.
POE Splitter
1set
M
to
M
DC
power
cable
1set
User
Manual
1set
1
)
Please
turn
off
the
system
'
s
power
before
the
installation
；
2)
Connect network
cable
with
PoE Switch and connect the other cable end with the Poe IN
port;
3
)
Connect
the
IP
camera
to
POE
splitter’s ethernet port with another cable;
4) Connect Splitter
'
s
DC
port
with
the
IP
camera’s Power port with the DC cable
.
5
)
Please
examine
the
system
and
power
it;
Installation
The
product
is
a
PoE
Network and Power Splitter based on
. The device is
compatible with POE switch that based on IEEE
802
.
3af standard. The product can also
provide network and power source for network device that does not support PoE function.The
product
provide
DC
5V
/
12V
/
24V
3
Level
Power
output. It can support different power request
for IP camera or IP device.
。
IEEE
802
.
3af
Feature
PoE
Splitter
Voltage Output:
DIP
Adjustment
Available
,
available
for
various
ethernet
product
.
Support
10
/
100
/
1000
Mbps
data
conversion
.
Power
Output
：≤
15
.
4W;
Transmission Medium
：
Cat5
/
5e/
Standard: Support IEEE802.3af
Standard
;
Power
supply
support
A
（
End-Span
）
and
mode
B
（
Mid-Span
）
Protection: Excellent circuit protection, strong lighting protection and anti-interference.
DC5V/12V/24V
6 Cable;
；
PoE
Splitter
1
2
Cat5/5
e/6 N
etwor
kCab
le
Mon
itor
NVR
IP PTZ Camera
IP Camera
IP Dome Camera
Front
Back
Notice
To
make
sure
the
transmission
quality
,
please
use
standard
Cat5
/
5e
/
6
cable.
POE S
witch
Application
POE S
plitte
r
IP Camera
Ethernet
PWR
DC
1
2
3
4
5
6
Ethernet
2
PWR
DC Power Output LED，On: Power output
Off: Power not output
3
DC
DC Power output port
4
5V/12V/24V
DIP Switch, DIP level control different DC power output,
5V/12V/24V power output available
5
PWR
PoE Power Input LED, On: PoE power input
Off: PoE power not input
6
PoE IN
PoE E
thernet Input Port
Ethe
rnet
Ethe
rnet
Ethe
rnet
Ethe
rnet
DC P
owe
r
DC P
owe
r
DC P
owe
r
DC P
owe
r
5V
PWR
12V
24V
PoE IN
3
2
Board Diagram
Specifications
Troubleshooting
Installation
Front
Back
No.
Board
Description
1
Ethernet
Ethernet Output Port
2
PWR
DC Power Output LED
3
DC
DC Power Output Port
4
5V/12V/24V
DIP Power Level Selector
5
PWR
PoE Power Input LED
6
PoE IN
PoE Ethernet Input Port
ITEM
Description
Power
Protocol
IEEE803.2af
Power System
A (End-Span) and B (Mid-Span)
Power Rate
≤
15.4W
Input Power
PoE 48V / 15.4W
Output Voltage
DC 5V/12V/24V adjustable
Output Max Current
1.5A
Ethernet
Communication Port
1 x RJ45 Input
Transmission Rate
10 / 100 Mbps, 10/100/1000 Mbps
Medium
Cat5/5e/6 Cable
Distance
100m (300ft. Max)
Protection
Surge Protection
1KV per: 1EC61000-4-5
ESD
1a contact discharge level 3
1b air discharge level 3
Per: 1EC61000-4-2
Environment
Working Temp.
0°C ~ 55°C
Storage Temp.
-20°C ~ 70°C
Humidity
0 ~ 95%
Structure
Dimensions
80 x 59 x 24 mm
Weight
146g
Stability
MTBF
>30000h
1. Please turn off all power to your system before installation.
2. Connect network cable to your PoE switch, and the other end to the PoE port on
the splitter. (#6 in diagram above)
3. Using another network cable, connect your IP device to the splitters ethernet port.
(#1 in above diagram)
4. Connect the provided DC cable to your IP device and the other end of cable to the
splitters DC port. (#3 in above diagram)
5. Examine all cable connections and power on the system.
1. Please check that all connections are secured and in the correct locations according
to this user manual.
2. Please make sure that the power rate output DOES NOT surpass 15.4W, Also that
the input network device DOES NOT surpass 15.4W
3. Double check that cable connectors reach EiA/TIA568A or 568B standards.
4. If problems persist, please contact www.
provisual
.com
