iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
113
6.7 SAS JBOD Expansion
6.7.1 Connecting JBOD
iSCSI RAID controller suports SAS JBOD expansion to connect extra SAS dual JBOD
controller. When connecting a dual JBOD controller which can be detected in RAID
Subsystem management GUI, it will be displayed in “Show PD for:” under “/ Volume
configuration / Physical disk” menu. For example, Local, JBOD 1, JBOD 2, …etc.
Local means disks located in local RAID subsystem, JBOD 1 means disks located in first
JBOD subsystem, and so on. The hard drives in JBOD can be used as local disks.
Summary of Contents for 3164S1/D1-G1S3
