iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
37
Chapter 4 Quick Setup
4.1 Management Interfaces
There are three management methods to manage the iSCSI RAID subsystem described
as follows:
4.1.1 Serial Console Port
Use NULL modem cable to connect console port.
The console settings are on the following:
Baud rate: 115200, 8 bits, 1 stop bit, and no parity.
Terminal type: vt100
Login name: admin
Default password: 00000000
4.1.2 Remote Control – Secure Shell
SSH (secure shell) is required for remote login. The SSH client software is available at
the following web site:
SSHWinClient WWW:
http://www.ssh.com/
Putty WWW:
http://www.chiark.greenend.org.uk/
Host name: 192.168.10.50 (Please check your DHCP address for this field.)
Login name: admin
Default password: 00000000
NOTE: This iSCSI RAID Series only support SSH for remote
control. For using SSH, the IP address and the password is
required for login.
Summary of Contents for 3164S1/D1-G1S3
