iSCSI GbE to SAS/SATA II RAID Subsystem
40
User Manual
CAUTION! Before power off, it is better to execute “Shutdown” to
flush the data from cache to physical disks.
4.1.4 Web GUI
The iSCSI RAID subsystem supports graphical user interface (GUI) to operate the
system. Be sure to connect the LAN cable. The default IP setting is DHCP; open the
browser and enter:
http://192.168.10.50 (Please check the DHCP address first on LCM)
Click any function at the first time; it will pop up a dialog window for authentication.
User name: admin
Default password: 00000000
After login, you can choose the function blocks on the left side of window to do
configuration.
Summary of Contents for 3164S1/D1-G1S3
