iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
51
5.2.3 Login Setting
“Login setting” can set single admin, auto logout time and Admin/User password.
The single admin can prevent multiple users access the same controller at the same
time.
1.
Auto logout: The options are (1) Disable; (2) 5 minutes; (3) 30 minutes; (4)
1 hour. The system will log out automatically when user is inactive for a period
of time.
2.
Login lock: Disable/Enable. When the login lock is enabled, the system allows
only one user to login or modify system settings.
Check “Change admin password” or “Change user password” to change admin or
user password. The maximum length of password is 12 characters.
Summary of Contents for 3164S1/D1-G1S3
