iSCSI-to-SATA II RAID Subsystem
User Manual
25
2.8.2 Serial Monitor Port
Use NULL modem cable to connect to serial Monitor port.
The serial port setting is baud rate:
115200
, 8 bits, 1 stop bit, and no parity.
Terminal type:
vt100
Login name:
admin
Default password:
00000000
2.8.3 Remote Control – Secure Shell
SSH (secure shell) is required for the iSCSI RAID subsystem to remote login. The
SSH client software is available at the following web site:
SSHWinClient WWW:
http://www.ssh.com/
Putty WWW:
http://www.chiark.greenend.org.uk/
Host name:
192.168.10.50
(Please check your DHCP address for this field.)
Login name:
admin
Default password:
00000000
NOTE: The iSCSI RAID series only support SSH for remote
control. For using SSH, the IP address and the password is
required for login.
