iSCSI-to-SATA II RAID Subsystem
26
User Manual
2.9 Enclosure
2.9.1 LCD Control Module (LCM)
There are four buttons to control the subsystem LCM (LCD Control Module).
After booting up the subsystem, the LCD Display will show the management port IP
(for example: 192.168.10.50 from DHCP server) and iSCSI model name:
192.168.10.50
iSCSI-Model-Name
Press
“ENT”
, the LCM functions
“System Info,”
,
“Alarm Mute”
,
“Reset/Shutdown”
,
“Quick Install”
,
Volume Wizard”
,
“View IP Setting”
,
“Change IP Config”
and
“Reset to Default”
will rotate by pressing
c
(up) and
d
(down).
When there is WARNING or ERROR level of event (LCM default filter), the LCM shows
the event log to give users event information from LCD front panel too.
