Version 1.0
Version 1.0
Safety Precautions
6
6
1.3. During Operation:
• Inspect wire rope, hook, and slings before operating the
puller. Frayed, kinked or damaged wire rope must be replaced
immediately. Damaged components must be replaced before
operation. Protect parts from damage.
• Remove any element or obstacle that may interfere with
safe operation of the puller.
• Always be certain the anchor you select will withstand the
load and the strap will not slip.
• Always use supplied hook strap whenever spooling puller
wire rope in or out, during installation and during operation.
• Always require operators and bystanders to be aware of
the load.
• Take time to use appropriate rigging techniques for a
pull.
• Do not touch wire rope or hook while someone else is
operating the lever.
• Do not touch wire rope or hook while under tension
or under load.
• Stand clear of wire rope and load and keep others
away while pulling.
• Do not attach puller wire rope back onto itself. Use a choker
chain or tree trunk protector on the anchor.
• Do not use puller as a hoist or to suspend a load.
• Always be certain anchor will withstand load, use
appropriate rigging and take time to rig correctly.
• Do not use puller to lift or move people.
• Always use proper lifting technique or get lifting assistance
while handling and installing.
• Do not operate any equipment on which the safety
labels are missing or illegible.
• Report any malfunction or irregular operation of the
equipment.
• Do not operate an equipment that has been modified
without previous PROWINCH® approval.
An improper operation of the equipment can create a potentially hazardous
situation which, if not avoided, could result in minor or moderate injuries. To avoid
a potentially hazardous situation, always take time to fully understand your puller
and pulling operation by reviewing this manual.
Never let puller wire rope slip through your hands.
Never use puller as a hoist or to suspend a load.
WARNING
Moving parts can
crush and cut.
Disconnect power
before opening.
PWWA005-V1.0
