Version 1.0
Version 1.0
Operation
8
8
4. OPERATION
4.1. Qualified Operator
4.2 Handling Precautions
Lever puller operators are required to read and fully understand the operation section of this manual, all warnings contained in
the manual, and labels attached to the equipment.
Operator training must be provided to ensure proper operation of equipment in compliance with instructions provided by the
equipment manufacturer and the provisions of ASME B30, and proper rigging procedures for the attachment of loads to the
puller.
Safe and efficient operation of the puller requires an operator who exercises caution, common sense, and good judgment in
anticipating the effects of operating the puller. The operator must be fully alert, focused, and aware of the surroundings at all
times.
The job must be strictly carried out under the good practices defined by the applicable international and national safety
standards, such as ANSI, OSHA and ASME.
This puller must not be operated by individuals who:
•
Cannot read, understand and speak the language in which the security labels, ID Plate and User Manual of equipment
is written.
•
Does not meet the legal age requirements.
•
Is under the influence of alcohol, drugs, or medication.
•
Has visual or hearing impediments, or below normal reaction times.
•
Has a history of or experiences seizures, mental, heart, or other illnesses that could interfere with safe operation of the
equipment.
•
Has not been trained for the proper use of the puller.
•
Has not received and read the User Manual for the exact equipment.
•
Has not demonstrated qualifications through practical operation of puller.
ALWAYS:
•
Keep puller in good condition and able to freely operate.
•
Make smooth movements; avoid sudden changes of direction.
•
Check the function of the puller without a load before operation.
•
Make sure no one is beneath the load.
NEVER:
•
Use pulleys or other accessories that are not specifically approved for the puller model.
•
Raise a load with the tip of the hook.
•
Exceed the maximum capacity of the puller.