IR lock
The remote control’s infrared signal can be locked. The IR signal is locked using a lock on the remote
control. It is not possible to lock the buttons and the IR signal at the same time.
8.5. Input
It is possible to change the touchscreen’s input source. This is particularly useful when using the PC
module (OPS) or an external input source, such as an external PC or laptop.
The touchscreen offers the choice between the following inputs:
●
Prowise Central home
●
PC (the PC module)
●
HDMI 1 input (HDMI 2.0 (4K @ 60 Hz))
●
HDMI 2 input (HDMI 2.0 (4K @ 60 Hz))
●
HDMI 3 input (HDMI ARC 2.0 (4K @ 60 Hz))
●
DP input (Displayport 1.2 (4K @ 60 Hz))
The touchscreen displays a message if there is no active signal coming from the chosen input source. In
that case, select a different input or connect a device to the chosen input so the touchscreen receives a
signal. After 30 seconds, the touchscreen displays the message “The system will shut down in: 15
seconds.” Select “Shut down” or wait 15 seconds to turn off the touchscreen. Select “Cancel” to stop the
touchscreen from turning off, this allows you to navigate to a different input source.
Manual
37
