3. Installation
A Prowise certified mechanic will install the Pro Line+ Multi-touchscreen on delivery and will ensure the
screen is ready for use. We do not recommend it, however if you want to install the screen yourself or by
someone else, then please follow the following steps:
●
Do not install the touchscreen alone.
●
Use a certified Prowise wall bracket when assembling a wall lift or mobile lift.
●
Please ensure the wall is strong enough to carry the weight of the touchscreen.
●
Connect the cables (which cables you require depend on the external devices you use or other
external sources like a lift system).
●
If you are using a PC module, ensure the module is inserted and tightened correctly. Install the PC
module as described in the chapter ‘Install PC module’.
●
Make sure to only connect the power cable when the above elements have been connected.
CAUTION!
Prowise can not be held responsible for any damage or injury caused by the
incorrect installation of the touchscreen done by third parties. Damage to the touchscreen,
caused by incorrect installation by third parties, will not be covered by the warranty. Always
contact Prowise or a certified partner if you have any questions about the installation.
3.1.Place of installation
Please follow the instructions below, these will help guarantee reliable functioning and a long lifespan of
your touchscreen.
Keep the touchscreen and all connected devices away from moisture and avoid dust and heat. Do not
place the touchscreen near devices which produce heat or in the vicinity of water. Non-compliance with
these instructions can lead to faults or damage to the touchscreen.
The multi-touchscreen can be used at an ambient temperature from 0 °C to +38 °C (32 °F to 100,4
°F) and relative humidity from 10% to 90% (without condensation).
When switched-off, the touchscreen can be stored at a temperature from -20 °C to 60 °C (-4 °F to 140 °F)
and relative humidity from 10% to 90% (without condensation).
Manual
7
