Install the touchscreen on a stable, vibration-free surface/wall to avoid damage to the touchscreen. Make
sure that all of the ventilation openings, located at the back of the screen, stay uncovered, so hot air can
escape.
WARNING!
Disconnect the power cable during a thunderstorm. For extra safety, we
recommend using an overvoltage protection device, to prevent the touchscreen from
sustaining damage as a result of power surges or lightning strikes.
3.2.Cabling
Only use the power cable supplied by Prowise to connect the Multi-touchscreen to the mains
power supply. The touchscreen must be placed close to the electrical outlet and the electrical outlet
should be easy to reach. Cables should not be laid in the walkway to avoid anyone stepping on them or
tripping over them. Do not place any objects on the cables to avoid damaging them. Prevent electrical
overloads when using a distributing plug, as this can lead to a short circuit.
For extra safety, we recommend using an overvoltage protection device to prevent the touchscreen
from sustaining damage as a result of power surges or lightning strikes.
CAUTION!
Only plug the power cable into grounded electrical outlets with AC 100-240V
~50/60Hz. If you are not sure about the power supply at the installation location, consult your
energy company.
Manual
8
