background image

9

www.prowise.com

© Prowise B.V.

User Documentation Prowise Mobile Lift

Version 2016

2 Safety

2.1 Introduction

The Mobile Lift has been designed and constructed so that it can be used and maintained safely, based on the 

use, the conditions of use and the instructions given in this document. It is, therefore, necessary for everybody 

who is authorized to work with or on the Mobile Lift to read and observe the instructions.

The work stated in “Operating instructions” can be performed by service personnel.

Work that is not stated in “Operating instructions” may only be carried out by skilled personnel. Keys or special 

tools provided for restricting access to certain sections or functions must not be left unattended on the 

machine. Only people with the required knowledge or who  have received the required training may use them.

2.2 General safety rules

• 

Only move the Mobile Lift when it is in the lowest setting.

• 

Do not place the lift in the vicinity of water. Do not place any liquids on or close to the lift.

• 

Do not open the lift by unscrewing it. There is a risk of an electric shock.

• 

Do not place the Mobile Lift on an incline.

• 

Safety features must not be removed nor rendered non-operational.

• 

All the required safety features must be in a good condition and function correctly.

• 

Make sure there is sufficient ambient lighting when carrying out maintenance work.

Summary of Contents for PW.1.21003 Series




















Reviews: