1.0: Differential Gear Sets
Youtube guide for this stage:
Requires following bags:
7:
60021 Gear Box
60045 Front/Rear Diff. Gear Set
60065 Center Diff. Gear Set
9:
60086 Countersunk Self-tapping Screw 3*10
60091 Countersunk Self-tapping Screw 3*16
61001 Chassis
61025 Countersunk Mech Screw 3*10
15:
60019 Rear Lower Susp. Arm Holder
60020 Rear Lower Susp. Arm Reinforcement Plate
60044 Adjustable Bushes
60091 Countersunk Self-tapping Screw 3*16
19:
60013 Front Lower Susp. Arm Holder
60022 Suspension Holders
60085 Countersunk Self-tapping screw 3*25
60091 Countersunk Self-tapping Screw 3*16
1.1: The first step will be to mount the differential Gear Sets to the chassis. To prepare for this, open
bag 7 containing Diff. Sets. You will notice two of the
differential gears are identical –these 60045
Front/Rear Diff. Gear Set- while one is unique –this is
60065 Center Diff. Gear Set-, and two Gear Boxes -
60021 Gear Box- each split into two parts. Place the
Center Diff. aside for later. Pick any of the two
identical back pieces of a Gear Box –this is the one
with a driveshaft-, open bag 15 and take the metal
piece –60020 Rear Lower Susp. Arm Reinforcement
Plate- and the two screws -60091 Screw 3*16- from
the smaller bag inside, making sure to keep the other
contents in the bag for later. Attach the metal part to
the Gear Box part just under where the driveshaft
exits the Gear Box, as shown in picture. This is the
Rear Gearbox Assembly.
