QB.11-R Installation and Management
57
5
System Status
This chapter describes viewing system status and event log information from the unit’s Web Interface.
Click on the
Status
button to access system and event log information. See the following sections:
•
•
Help and Exit buttons also appear on each page of the Web interface; click the
Help
button to access online help; click
the
Exit
button to exit the application.
For an introduction to the basics of management, see
.
Status
The
Status
tab showing the system status is displayed automatically when you log into the Web Interface. It also is the
default window displayed when you click the
Status
button on the left side of the window.
The
Status
tab shows the
System Status
and the
System Traps
.
System Status
The basic system status is shown in this section, including the version number of the embedded software.
Systems Traps
The status of system traps is shown in this section. System traps occur when the unit encounters irregularities. Deleting
system traps has no effect on the operation of the unit. System traps also are sent to an SNMP manager station (if so
configured). See “Alarm Traps” in the
Tsunami MP.11/QB.11 Reference Manual
for a list and description of the traps.
