Configuration
QB.11-R Installation and Management
SNMP Parameters
81
SNMP Parameters
Click
Configure
>
SNMP
to enable or disable trap groups, and to configure the SNMP management stations to which the
unit sends system traps. See “Trap Groups” in the
Tsunami QuickBridge.11 Reference Manual
for a list of the system
traps.
•
Trap Groups:
You can enable or disable different types of traps in the system. By default, all traps are enabled.
•
Trap Host Table:
This table shows the SNMP management stations to which the unit sends system traps.
Trap Host Table
Add Entries to the Trap Host Table
Click the
Add Table Entries
button to add entries to the Trap Host Table.
Edit/Delete Entries in the Trap Host Table
Click the
Edit/Delete Table Entries
button to make changes to or delete existing entries.
