Configuration
QB.11-R Installation and Management
Management Parameters
83
Management Parameters
Use the management tab to configure passwords and other service parameters.
Passwords
The
Password
tab lets you configure the SNMP, Telnet, and HTTP (Web Interface) passwords.
For all password fields, the passwords must be between 6 and 32 characters. Changes take effect immediately after you
click
OK
. The following passwords are configurable:
•
SNMP Read Community Password:
The password for read access using SNMP. Enter a password in both the
Password
field and the
Confirm
field. The default password is
public
.
•
SNMP Read/Write Community Password:
The password for read and write access using SNMP. Enter a password
in both the
Password
field and the
Confirm
field. The default password is
public
.
•
Telnet (CLI) Password:
The password for the CLI interface (via serial or Telnet). Enter a password in both the
Password
field and the
Confirm
field. The default password is
public
.
•
HTTP (Web) Password:
The password for the Web browser HTTP interface. Enter a password in both the
Password
field and the
Confirm
field. The default password is
public
.
Service
The
Services
tab lets you configure the SNMP, Telnet, HTTP (Web Interface), and serial connection parameters.
Changes to these parameters require a reboot to take effect.
