Configuration
QB.11-R Installation and Management
Filtering Parameters
94
Click the
Edit Table Entries
button to display an editable window such as the following. You can configure whether this
traffic must be blocked for Ethernet to wireless, wireless to Ethernet, or both.
IP Access Table Filtering
Click
Configure
>
Filtering
>
IP Access Table
to limit in-band management access to the IP addresses or range of IP
addresses specified in the table.
For example,
172.17.23.0/255.255.255.0
allows access from all wireless stations with an IP address in the 172.17.23.xxx
range.
This feature applies to all management services (SNMP, HTTP, and CLI), except for CLI management over the serial
port.