Introduction
The Proxy Mobile Reader Nano Inline and Mobile Reader Nano Connect boards are installed between a
controller and an access control reader. When users present their credential (card, key fob, fingerprint,
etc.) to the reader, the reader passes the Wiegand command to the controller. The access control
system then grants or denies access to the secure location.
The Nano Inline and Nano Connect are Bluetooth Low Energy (BLE) enabled. When users present their
phones enabled with the Proxy ID app, the Nanos communicate with the phone and pass the Wiegand
command to the controller. The access control system then grants or denies access to the secure
location.
Mobile Reader Nano Inline
Functionality
Nano Inline is a physical access control mobile credential reader, intended to be installed in locations
such as elevators and turnstiles. The reader is also capable of supporting pass through physical card
credentials when used in conjunction with a compatible physical card reader (not provided). The
reader can interface with an access control system equipped with a Wiegand interface. The reader
consists of the following main parts.
Dimensions
|
4
User Manual and Installation Guide: Mobile Reader Nano Inline & Mobile Reader Nano Connect
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/nano-install
