10
11
EN
EN
INSTRUCTIONS
How to use
1
4
7
2
3
5
6
1. Place the Popcorn Maker on a level surface.
2. We recommend wiping the Popcorn Maker and its accessories with a damp cloth before
use.
3. Measure the popcorn kernels using the Measuring Cup provided. One full cup is enough.
More than this may disrupt the proper functioning of the Popcorn Maker.
4. Preheating the device is not necessary.
5. Do not add any other ingredients, such as oil, butter, margarine, salt or sugar, as this may
lead to damage.
6. Pour the popcorn kernels into the aluminum heat chamber through the kernel’s inlet.
7. Place the measuring cup back inside the Top Cover after each use.
8. Place a large bowl under the outlet so that the edge of the bowl touches the body of the
Popcorn Maker. The popcorn is ejected through the popcorn outlet and into the bowl, so
make sure there is nothing obstructing its progress. Otherwise, it will interfere with the
device’s mechanism. Be aware that popcorn is hot and touching it prematurely may cause
minor discomfort.
9. Switch on the Popcorn Maker. After a few moments of continuous popping, popcorn will
be automatically produced from the aluminum heat chamber through the outlet until all
kernels have been popped. This process will take about 3 minutes.
Switch off the Popcorn Maker and unplug it once popping has stopped.
If you want more popcorn, please remove any remaining kernels from the aluminum heat
chamber beforehand. Be careful not to get burnt while handling the top cover and the meas-
uring cup, since they become very hot when the Popcorn Maker is working.
Note:
Wait approx. 15 minutes before using the Popcorn Maker again.
Troubleshooting
Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM
CAUSE
SOLUTION
The popcorn won’t come
out
Excessive amount of popcorn
kernel
Remove excess kernel
The kernels have expired
If the kernels have expired,
they may not pop. Make sure
to use new kernel
The appliance switches
off during operation
The overheat protection has
been activated
Switch off the appliance and
allow it to cool for 15 – 20
minutes
The appliance is not
working
The appliance is not plugged in Insert the plug into the wall
outlet
The wall outlet not energized
Check the fuses and the circuit
breaker
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-
ered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for final consumers.
This warranty is valid exclusively for consumers who purchase the product for non-profession-
al purposes.
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a
2-year period, counting from the date of initial purchase by a consumer and respective deliv-
ery, or for longer if legally established by the applicable national law.
8
03:00
9
