ContentDepot Installation Guide
11
Specs for file sharing
Feature
Description
Default setting
Directory for
parse cut
Stores files for automation systems that
must use shorter filenames.
/data/xdcache/CDCutID
shared as “CDCutID”
Refer to your automation system’s documentation to determine which program directory you should map to for
file sharing, or check with the vendor. For more information about file locations, file naming, and metadata
structure in ContentDepot files, refer to the Station Automation System (SAS) interface documents available at
www.prss.org.
Internet Connection
Internet access enables stations to take full advantage of the ContentDepot. The type of Internet access you
need depends on the features that you want. Use the following table as a guide to acquiring the Internet access
that suits your needs. Stations without Internet access should contact PRSS for assistance.
Requirements for Internet access
Feature
Description
Device
Recommend
ContentDepot
web portal
Stations use the portal to register a station
profile and subscribe to programming.
Administrator's
workstation
Dial-up or
better
Local Broadcast Plant and Cueing
Each of the ProAudio’s stream decoders supports up to four audio channels. For each of the four audio
channels, three outputs are simultaneously present on the back of the decoder: stereo analog (L and R), stereo
AES digital (AES), or 9-pin D-type balanced audio. You can also use the four sets of relays on the terminal
block to signal station audio devices. Refer to the Pro Audio installation guide for connector and pinout
specifications.
