2.0 Frame Assembly - Reprap Prusa Mendel Build Manual
©2012 NextDayReprap
Prusa Mendel Kit Build Manual V1.01 - 07/2012
A step by step guide for building your Prusa Mendel 3D Printer Kit.
2.1
Parts Required
2 x Lower Z Mount
2 x Frame Vertex
4 x Frame Vertex
4 x Bar Clamp
1 x Y Motor Mount
2 x Z Motor Mount
6 x 380mm Threaded Rod
4 x 300mm Threaded Rod
1 x 320mm Threaded Rod
2 x 450mm Threaded Rod
4 x M8 Fender Washers
80 x M8 Washers
78 x M8 Nuts
4 x 608 Bearings
2.2
Assembly
Step 1
Take one Lower Z Mount and push in one 608 Bearing. Push down against a solid flat surface
to ensure the bearing sits flush in the plastic part.